Oil Well Head Equipment

Wellhead Equipment can be classified as the conventional components. Wellhead products that consist of base plates which are easily detachable from the casing head for reattaching and welding. Equipment like them provides extra load for supporting the higher case loads. Wellhead casing has a straight bore design that accepts casings of different hangers. The line pipe threaded outlets, studded or flanged outlets can be also provided. Bottom preps include a slip on weld and threaded connections.

Equipment like casing hangers combine pack off and slip bowl hangers. Wellhead is easy to install and is also fluted for allowing the cement returns. Wellhead Equipment can also be included as the casing spools that have a top bowl configuration. Equipment has locking pins. Wellhead secondary seals help in the installation of tubing heads and casing spools to provide pressure energized secondary seals. Wellhead tubing has a fully opened straight bore design with a dual completion head available and is compatible with a variety of tubing hangers.

Casing Head Model KG 3

The equipment is used for casing and tubing application. Casing head is to meet extreme well service conditions from -60 C to 121 C. Working substance: oil, gas, gas condensate with mechanical admixtures to 25 mg/l, Frn W to 80%. Performance characteristics:

Entirely conforms to standard API 6A;

  • Nominal bore: 280-508 (11-20)
  • Working pressure, MPa (PSI): 5000-15 000
  • Working fluid: oil, gas, solution, water
  • Working temperature: -60 C +121 C
  • Material class: АА, ВВ, СС, DD, ЕЕ, FF, НН
  • Product’s specification: PSL1-PSL4
  • Strength class: PR1, PR2

Yemen Contact

Hadda Street, Sana'a, Yemen

P.O. Box 7067

Office: 00-967-1-427487
Fax: 00-967-1-410280
Mobile: 00-967-737799991

Canada Contact

Ottawa, Ontario, Canada

Office: 1-613-796-3860
Fax: 1-613-695-3865
Mobile: 1-613-608-4566

Mailing Address

Extra Petroleum

2700 Saratoga Place
Suite # 715
Ottawa, Ontario, Canada
K1T 1W4

Send Email